MP9361 high performance regulated charge pump MP9361 rev. 0.9 www.monolithicpower.com 1 11/3/2008 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2008 mps. all rights reserved. the future of analog ic technology description the MP9361 is a high performance, regulated charge pump converter. its input voltage ranges from 2.8v to vout. the output voltage is regulated to a fixed 5v. no external inductor is required for simplicity and compactness. internal soft-start circuit effectively reduces the in-rush current both while start-up and mode change. the MP9361 is available in a compact tsot23-6 package features ? input voltage range: 2.8v to 5v ? internal soft-start ? output maximum current up to 110ma ? fixed 5v output voltage with 30mv ripple ? 2x charge pump ? fixed 1.35mhz switching frequency ? over current protection ? short circuit protection ? in-rush current limit ? tsot23-6 package and lead (pb)-free applications ? cell phone, smart phone, led backlight ? pda or hand held computer ? camera flash white led ? lcd display supply ? tv-remote control ?mps? and ?the future of analog ic technology? are registered trademarks of monolithic power systems, inc. typical application cp cn 6 4 1 out gnd en in 3 2 5
MP9361?high performance regulated charge pump MP9361 rev. 0.9 www.monolithicpower.com 2 11/3/2008 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2008 mps. all rights reserved. package reference out gnd en 1 2 3 6 5 4 cp in cn top view part number* package temperature MP9361dj tsot23-6 -40 c to +85 c * for tape & reel, add suffix ?z (e.g. MP9361dj?z) for rohs compliant packaging, add suffix ?lf (e.g. MP9361dj?lf?z) absolute maxi mum ratings (1) supply input voltage .................. ?0.3v to +6.0v all other pins.............................. ?0.3v to +6.0v storage temperature ..............?65c to +150 c recommended operating conditions (2) supply voltage v in .......................... 2.8v to 5.0v output voltage v out ................................... 5.0v operating temperature .............?40 c to +85 c thermal resistance (3) ja jc tsot23-6.............................. 195 ..... 25... c/w notes: 1) exceeding these ratings may damage the device. 2) the device is not guaranteed to function outside of its operating conditions. 3) measured on approximately 1? square of 1 oz copper. electrical characteristics v in =3.7v, c in =c out =2.2uf, c p =0.22f, t a =25 c, unless otherwise noted parameter symbol condition min typ max units input supply voltage v in 2.8 5 v output voltage v out vin>3.2v, i out <110ma 4.8 5 5.2 v quiescent current i q i out =0 2 4 ma maximum output current i o v in >3.2v 110 ma over current protection i ocp v out =5v 250 350 500 ma short circuit protection i short 60 90 ma output ripple i out =60ma 30 mv shut down current i shdn v in =4.5v, v en <0.4v 0.1 1 a operation frequency f osc 1.1 1.35 1.6 mhz enable voltage, high v en (high) 1.5 v enable voltage, low v en (low) 0.4 v enable pin leakage i en v en =5v 0.2 1 a pin functions pin # name description 1 out output voltage. decoupled with a 2.2f cerami c capacitor for a load current less than 60ma. for a load current greater than 60ma, use 10f decoupling capacitor. 2 gnd ground. 3 en device enable: a logic high input (v en >1.5v) turns on the regulator. a logic low input (v en >0.4v) 4 cn flying capacitor negative terminal. 5 in input. 6 cp flying capacitor positive terminal.
MP9361?high performance regulated charge pump MP9361 rev. 0.9 www.monolithicpower.com 3 11/3/2008 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2008 mps. all rights reserved. typical performanc e characteristics v in =3.7v, v out =5v, c1=c2=2.2 f, c3=0.47 f. t a =25oc, unless otherwise noted. load regulation 58 66 74 82 90 0 4.5 4.6 4.7 4.8 5.0 4.9 efficiency vs. load current efficiency vs. input voltage i out =50ma i out =20ma i out =0ma i out =60ma i out =0ma i out =110ma
MP9361?high performance regulated charge pump MP9361 rev. 0.9 www.monolithicpower.com 4 11/3/2008 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2008 mps. all rights reserved. typical performanc e characteristics v in =3.7v, v out =5v, c1=c2=2.2 f, c3=0.47 f. t a =25oc unless otherwise noted. ( continued ) v out 2v/div v out 5v/div v in 2v/div v en 2v/div v in 2v/div v sw 2v/div i in 0.2a/div i in 0.5a/div v in 2v/div v out 2v/div v pwm 2v/div i out 0.1a/div v cn 2v/div v in 2v/div v out 50mv/div i out 50ma/div v out 50mv/div v cn 2v/div v in 2v/div i out 50ma/div v out 2v/div v in 2v/div v pwm 2v/div i out 0.1a/div 2ms/div 400ns/div 400ns/div 10ms/div inrush current v in =2.8v, i out =64ma with resistor load inrush current v gn =v in =3.6v, i out =64ma with resistor load load pwm dimming operation v en =v in =2.8v, f pwm =100hz load pwm dimming operation v en =v in =2.8v, f pwm =2khz normal load ripple v en =v in =2.8v, v out =5v, i out =60ma normal load ripple v in =v en =4v, i out =60ma
MP9361?high performance regulated charge pump MP9361 rev. 0.9 www.monolithicpower.com 5 11/3/2008 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2008 mps. all rights reserved. operation mode detection / swtich control band-gap 1.35mhz osc vbg osc osc vcc en vss vout c+ c- switch drivers c - c+ charge pump figure 1? functional block diagram the MP9361 uses a switched capacitor charge pump to boost an input voltage to a regulated output voltage. regulation is achieved by sensing the charge pump output voltage through an internal resistor divider network. a switched doubling circuit is enabled when the divided output drops below a preset trip point controlled by an internal comparator. the switching signal, which drives the charge pump, is created by an integrated oscillator within the control circuit block. the fixed charge pump switching frequency is approximately 1.35mhz. the MP9361 has complete output short-circuit and thermal protection to safeguard the device under extreme operating conditions. an internal thermal protection circuit senses die temperature and will shut down the device if the internal junction temperature exceeds approximately 145c. the charge pump will remain disabled until the fault condition is relieved.
MP9361?high performance regulated charge pump notice: the information in this document is subject to change wi thout notice. users should warra nt and guarantee that third party intellectual property rights are not infringed upon w hen integrating mps products into any application. mps will not assume any legal responsibility for any said applications. MP9361 rev. 0.9 www.monolithicpower.com 6 11/3/2008 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2008 mps. all rights reserved. package information tsot23-6 0.30 0.50 seating plane 0.95 bsc 0.84 0.90 1.00 max 0.00 0.10 top view front view side view recommended land pattern 2.80 3.00 1.50 1.70 2.60 3.00 1 3 4 6 0. 0 0. 2 note: 1) all dimensions are in millimeters. 2) package length does not include mold flas h protrusion or gate burr. 3) package width does not include interlead f l or protrusion. 4) lead coplanarity (bottom of leads after fo r shall be 0.10 millimeters max. 5) drawing conforms to jedec mo-193, variatio n 6) drawing is not to scale. 7) pin 1 is lower left pin when reading top mar k left to right, (see example top mark) 0.30 0.50 0 o -8 o 0.25 bsc gauge plane 2 t y 1.20 typ 0.95 bsc 0.60 typ see detail "a" detail a aaaa pin 1 see note 7 example top mark
|
